Muncie

Muncie’s 17 Series solenoid operated control valves provide flexibility you have never had before. Mount the valve assembly anywhere available on the chassis and locate your controls elsewhere in a convenient ...

HEAVY DUTY      The Muncie 82 Series is a heavy duty, 8 bolt Power Take-off designed for driving mechanical equipment and high volume or multiple section hydraulic pumps with high torque requi...

The 83 Series PTO offers one speed forward and one speed reverse. Originally designed for winch drives, these PTOs can be used to reverse rotation of the standard PTO output to match driven equipment. The 83 is an 8...

Muncie Power Products’ 8405/6A Series PTO uses an 8-bolt mounting for Eaton, Meritor & Mack transmission openings.  With a rigid structure and 225 Ft. Lb. of intermittent torque, this powerhouse is su...

Muncie's Advantage+ snow and ice control system combines two new unique technologies to increase reliability and revolutionize the method in which snow and ice removal fleets are operated and maintained  ...

The Advantage System is a mid-level technology solution for snow and ice control that provides the ultimate balance of performance, economy, convenience & safety. The controls are intuitive and extremely easy to...

Muncie Power Products' "Alpha" Series PTO uses proven internal components from the TG Series, in a compact housing. The integral shift mechanism provides proper clearance on Dodge Ram 4 x 4 chassis wit...

Muncie Power Products has the ability to provide a wide variety of cable controls. Heavy duty push-pull cables, vernier type throttle controls, replacement PTO cables, and remote cable / lever controls for many popu...

The CD05 Series Power Take-Off is a constant drive (non-shiftable) PTO designed to fit tight mount applications like the Peterbilt 320, Autocar LCF and the Hino 338 chassis.  The CD05 uses the same components a...

The CD-10 Series Power Take-Off is a constant drive (non-shiftable) PTO designed for use on the Allison and Caterpillar automatic transmissions. The CD-10 provides a functional alternative to front, crank shaft driv...

The Muncie CD40 Series PTO is designed for maximum PTO output torque for live engine driven equipment. The CD40 shares the same design technology as the shift-able CS41, including finish ground gearing and oversize...

Muncie central hydraulic enclosures are professionally designed and assembled to meet the specific requirements of snow and ice control vehicles. The enclosure includes a sealed compartment which contains the direct...

Combo Kits are designed for dual use applications involving a standard dump trailer in conjunction with Walking Floor, live bottom, or ejector type trailers. Combo Kits include a special high pressure, continuous du...

Muncie ASC2 Series consoles for dump truck applications are both functional and attractive. Muncie consoles include all necessary installation hardware, and are available in nine styles. Air valves can be equipped ...

The CS10 Series Power Take-Off is a heavy duty, Clutch Shift PTO designed specifically for Allison World® and Caterpillar transmissions. The CS10 Series PTO is engaged by means of a solenoid activated, wet clutc...

The CS24 Series Power Take-Off is a Clutch Shift PTO designed for Allison World® and Caterpillar automatic transmissions. The CS-24 Series PTO is engaged by means of a solenoid activated, wet clutch pack. The en...

The CS24 Series Power Take-Off is a Clutch Shift PTO designed for Allison World® and Caterpillar automatic transmissions. The CS-24 Series PTO is engaged by means of a solenoid activated, wet clutch pack. The en...

The CS6 and CS8 series are Clutch Shift PTO's designed to work well on Allison 1000 & 2000 series automatics and many current manual transmissions. Like all of Muncie's "Clutch Shift" line of P...

12 Volt DC Power Packs can be used to provide hydraulic power for light duty applications like lift gates, snow plows, dump bodies, and hay bale spikes. Power packs are generally used on single axle chassis where t...

The Muncie E and EH Series dump pumps are designed to meet the needs of the dump trucking industry. Muncie dump pumps are available in both direct and remote mount configurations; standard or extra-large port sizes;...

The Muncie EX Drive was designed to fit on Allison 3000 and 4000 series transmissions with retarder or cooler, and allows for large gear or piston pumps to be direct mounted, eliminating the need for timely drivelin...

FA6B's angular housing design moves the clutch shifted output below chassis obstructions for either drive shaft applications or direct mount pumps. Muncie's FA6B Series PTO is activated by electric over hydr...

The FR and FA Series power take-offs were designed in cooperation with Ford Motor Company's engineers to fit the 5R110 "TorqShift®" and 4R100 automatic transmissions. Two models of each series are ...

Muncie Power's FR3C power take-off gives you the maximum torque available from the F-650 and F-750 with the Ford Torqshift transmission and a keyed shaft output. Our PTO utilizes a one-piece housing design with ...

The FR66 can deliver up to 200 lbs  ...

The GA/GM series power take-offs are Clutch Shift style PTOs designed in cooperation with GM engineers for the Allison 1000, 2000, 2400 series transmissions. These PTOs are specifically for application on 2001 and ...

The GB Series front mount gearbox offers a variety of options for crankshaft driven power take-offs. Available in a wide range of speed ratios, shift options, and pump mountings, the GB Series gearbox is a versatil...

Muncie’s new GBFR series gearbox for the Ford FR66 PTO allows for driveshaft driven components to be used on the Ford 4x4 chassis. The gearbox is designed to clear the forward drive shaft and allow for a PTO d...

A solution for limited clearance applications, the HS24 Series power take-off features a sculptured housing designed to clear mounting obstructions and a direct mount solenoid for a clean and simple installation&nbs...

Muncie return line filters provide an effective and economical means of protecting and prolonging the life of any hydraulic system. Muncie return line filters are available in 25, 50 and 100 GPM sizes, with optional...

The MB Series Low Speed High Torque Motor is available in 13 displacement sizes. The MB Series motor utilizes a spool valve design. This delivers high efficiences across a broad torque range. The MB Series motor is ...

Save Time, Save Salt, Save Money      The Muncie MESP 3016 / 3017 Electronic Spreader Package is the latest spreader control system for snow and ice control vehicles. It is easy to install, se...

The MESP3020 is an Electronic Spreader Package with an integrated hoist circuit is a spreader control system for snow and ice control vehicles. This easy-to-use controller includes pause and blast functionality. fi...

Muncie's metal round reservoirs are available in both aluminum and steel and are designed for hard working, continuous-duty applications that may generate high amounts of heat and other applications where a meta...

Muncie offers metal upright tanks available in both aluminum and steel. Aluminum reservoirs are offered when weight, appearance and performance are important, while steel is the preferred solution when quality and d...

The MJ Series Low Speed High Torque Motor is available in 10 displacement sizes. The MJ Series motor is constructed using heavy-duty roller bearings designed for extra side load capacity. A heavy-duty drive link pro...

The MLSM Series Live Pak pump system provides protection against hydraulic overspeed damage while allowing the driver to maintain full use of the hydraulic system on refuse vehicles. The built-in flow limiter automa...

Muncie's MSV selector valve is well suited for a variety of applications. The two position two way valve provides a simple means of directing oil flow into two separate hydraulic circuits or can be used as a low...

Muncie’s Optimum Series high performance gear pumps/motors offer high pressure capabilities and are designed for durability and long life for many truck and mobile equipment applications. Full featured design...

Muncie’s Optimum Series high performance gear pumps/motors offer high pressure capabilities and are designed for durability and long life for many truck and mobile equipment applications. Full featured desig...

Muncie’s Optimum Series high performance gear pumps/motors offer high pressure capabilities and are designed for durability and long life for many truck and mobile equipment applications. Full featured desig...

Muncie fixed displacement piston pumps are designed for higher operating pressures than traditional gear pumps. Muncie offers four series of in-line piston pumps, including bent axis and tandem models. All mount dir...

Ultimate power and performance in a small package best describes the F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both long life and high performance  ...

Muncie's Priority Flow Divider valve provides simultaneous flow for two seperate hydraulic circuits from a single pump. The priority flow is adjustable from 0 to 30 GPM (114 LPM). The excess of bypass flow can b...

Muncie clutch pumps provide hydraulic power at the flip of a switch. Clutch pumps can be used in situations where a PTO aperture is unavailable or difficult to access. Although normally belt driven, clutch pumps ma...

The PH Series is an all cast iron gear pump designed for low to medium flow systems. Its' small package size makes it ideal for direct mounting to PTOs  ...

Pilot operated relief valves provide maximum system pressure protection, even with widely varying flow rates. These valves can be inline or tee mounted. Call our Toll Free # at 1-(800) 367-7867  for larger capa...

Our pin-pin mount cylinders are one of the lightest cylinders on the market, which translates to greater payloads, less oil consumption and faster dumping. The pin-pin mount boasts many key features including a self...

The PK Series is designed to meet the application needs of either a pump or a motor. All cast iron construction with 4 ports and roller bearing design. The pumps bi-rotational feature helps reduce inventory requirem...

The PL Series is designed to meet the application needs of either a pump or a motor. All cast iron construction with 4 ports and roller bearing design. The pumps bi-rotational feature helps reduce inventory requirem...

Our polyethylene reservoirs are available in box and upright design and are designed for easy installation. Polyethylene tanks are intended for use in intermittent-duty applications where heat buildup is not an issu...

Powr-Pro and Power-Miser are "dry valve" pump systems designed primarily for refuse vehicles. Dry valve pump systems lower operating costs by drastically reducing horsepower draw in the "Off" mo...

Gear adapters mount between the vehicle transmission and Power Take-Off and can serve several purposes. Most commonly, adapters are used to change the direction of rotation of the PTO output shaft. They can also be ...

Muncie’s PTO shaft extensions for the Allison 3000 and 4000 Series transmission provide easier hydraulic pump installation by moving the hydraulic pump mount to the rear of the transmission. Shaft Extensions a...

The Muncie V Series Variable Displacement pumps a set variable displacement piston pumps for use in closed center hydraulic systems. Pumps are available with either pressure compensation, or flow and pressure compe...

Muncie fixed displacement piston pumps are designed for higher operating pressures than traditional gear pumps. Muncie offers four series of in-line piston pumps, including bent axis and tandem models. All mount dir...

Muncie fixed displacement piston pumps are designed for higher operating pressures than traditional gear pumps. Muncie offers four series of in-line piston pumps, including bent axis and tandem models. All mount dir...

The RG Series PTO offers one speed forward and one speed reverse. Designed to be used on winch applications only, the RG is a 6-bolt unit with standard lever shift, and optional air-shift provisions available  ...

The RL Series PTO offers one speed forward and one speed reverse. Designed to be used on winch applications only, the RL is available in both 6-bolt and 8-bolt units with standard lever shift, and optional air-shift...

Rear mount power take-off with a special design for the Allison TC-10 TS transmission with high torque capabilities in a small package. Designed for end dump trailers, walking floors, conveyors, bulk transport dry o...