TRACE™ Edge Technology

The terrain-response advanced cutting edge is comprised of independent, 2' sections that raise, oscillate, and trip to accommodate contours and obstacles in the plowable surface. Working together, the sections remove more snow, reducing the amount of salt required. Two greasing locations allow the operator to keep the components well lubricated for maximum performance.

Common Attachment Plate

A common attachment plate with floating coupler makes installation easy with a wide variety of equipment and machinery, including skid-steers, wheel loaders, backhoes, and tractors. The floating coupler reduces negative down pressure from the vehicle, protecting against premature wear of the pusher cutting edge and components.

Easy Operation

Operation of the PILE DRIVER plow is conveniently tied into the equipment’s controls. Simply raise and lower the lift arm and angle the attachment plate to position the pusher in the correct orientation.

Self-Leveling Side Plates With Reversible, Bolt-On Shoes

The side plates ensure the TRACE edge remains in direct contact with the plowable surface. The reversible, bolt-on ski makes serviceability easy, allowing you to use both edges of the ski before replacing. The bolt-on design makes replacement in the field possible with a ¾" socket, ratchet, and 3/4" wrench.

3/4" Cutting Edge With Carbide Inserts

The PILE DRIVER plow performs in the most grueling commercial conditions. Each 2' section comes standard with a ¾" cutting edge with carbide insert and uses the same part number for easy replacement. No need to replace the full cutting edge, only the sections that show wear.

MODULAR DESIGN (14’ & 16’ WIDTHS)

When you purchase a 14’ or 16’ width pusher, you gain the advantage of two plow widths in one pusher. Remove the bolt on 2’ extensions on each end of the pusher to transition a 16’ into a 12’ option or a 14’ into a 10’ option. This increases flexibility for multiple property types that may benefit from a smaller pusher that is easier to maneuver.

*Some assembly/disassembly required.

Made In USA

The PILE DRIVER XL pusher plows are manufactured in the United States and use the same hydraulics manufacturing line that outfits WESTERN truck plows. This allows us to control the design and quality for a superior product, and easy access to maintenance parts.