location_pin Get Directions
7 Robinson Rd., Dunnville, Ontario, Canada N1A 2W1
Banner

Snow Removal

SnowEx® DPS-250 Drop Pro™ 250 & 600

Overview
Overview

Make quick work of sidewalks & pathways

Place salt exactly where it’s needed with the new line of stainless steel drop spreaders from SnowEx®. The Drop Pro 250 and Drop Pro 600 provide up to 36″ of spread width in a drop pattern to keep the salt exactly where your vehicle drives. With three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other hard surfaces where truck equipment can’t easily gain access.

Specifications
Model
DPS-250
Category Name
Snow Equipment
Year
2024
Sale Type
New
Manufacturer
SnowEx
Quantity
0
Manufacturer Qty
0
Motors
Direct Drive, 12V, Sealed
Capacity:
2.5 & 6.0 cu ft
Spread Pattern:
Drop
Spreading Width
30 to 36"
Capacity (Volume)
2.5 cu ft
Capacity (Weight)
350 lb
Vehicle Compatibility
UTVs & Tractors
Material Compatibility
Bagged Salt, 50/50 Salt/Sand Mix, Sand, Bagged Ice Melters, Calcium Chloride Pellets, Calcium Flakes
Approx. Weight* (Empty)
130 lb
Hopper Dimensions (LxW)
12.8" x 36.5"
Overall Dimensions (LxWxH)
17" x 42" x 17.25"
unique features

SnowEx® DPS 250 Drop Pro™ 250 & 600Fitted Lid With Rubber Straps

The material inside is protected by a custom-molded polyethylene lid that is secured by rubber straps.

SnowEx® DPS 250 Drop Pro™ 250 & 600Top Screen & Bag Splitter

The salt is loaded through and sifted by the 1/4″ stainless steel rod construction with grid top screen. A hinged bag splitter easily pulls up to open bagged rock salt for easy loading. When not needed, the bag splitter can be folded down and out of the way.

SnowEx® DPS 250 Drop Pro™ 250 & 600Easy-to Activate Baffles

A 36″ spread width makes applications on sidewalks and walking paths easy. When you factor in a 6″ salt leach after application, the SnowEx drop spreaders can treat these surfaces with one or two passes and limit damage to the grass or sensitive surfaces right next to the path. The spread width can be limited to 30″ by activating 3″ baffles on either side of the trough.

SnowEx® DPS 250 Drop Pro™ 250 & 600Free-Flowing Material Delivery System

The material delivery system uses proven paddle geometry and a new interference baffle to agitate the surrounding material with every revolution. This ensures a consistent amount of material flows into the spreader trough and, at the same time, keeps it from bridging.

SnowEx® DPS 250 Drop Pro™ 250 & 600Easy Clean-Out

The entire trough drops open for easy and fast material clean-out when the job is done. Simply open a latch pin on the right and left sides, and the trough will swing backward to empty the hopper of its material. This allows you to store any leftover de-icing material in a dry, weather-resistant container until you need it for the next job.

SnowEx® DPS 250 Drop Pro™ 250 & 600Construction Built to Last

Laser-cut stainless steel and high strength rivets are used to construct the new DPS-250 and DPS-600. Oil filled poly bearings are used to provide a long, maintenance-free service life.

SnowEx® DPS 250 Drop Pro™ 250 & 600Variable-Speed Control

Precisely match the weather conditions to the intended material delivery rate with enhanced speed control that includes a single variable-speed control knob to control the material flow rate.

mounts

SnowEx® DPS 250 Drop Pro™ 250 & 6002" Receiver Hitch (Standard)

A detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader.

Included With New Spreader Purchase

SnowEx® DPS 250 Drop Pro™ 250 & 6003-Point Mount (Standard)

The 3-Point Mount includes all the pins needed for installation and is intended for compact tractors and articulating loaders. The spreaders have been designed to include attachment points and hardware that are compatible with a 3-point style implement hitch. This style of attachment is common on tractors but can also be found on some other types of equipment as well.

Included With New Spreader Purchase

SnowEx® DPS 250 Drop Pro™ 250 & 600In-Bed Mount (Standard)

The spreaders were designed with in-bed mounting in mind where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV. This type of installation reduces stress on the equipment since the weight is positioned over the rear wheel as opposed to behind them and allows for additional versatility to maneuver in tight spaces.

Included With New Spreader Purchase

 

material compatibility

SnowEx® DPS 250 Drop Pro™ 250 & 600Bulk Salt

SnowEx® DPS 250 Drop Pro™ 250 & 600Bagged Rock Salt

SnowEx® DPS 250 Drop Pro™ 250 & 600Bagged Ice Melters

SnowEx® DPS 250 Drop Pro™ 250 & 60050/50 Sand/Salt Mix

SnowEx® DPS 250 Drop Pro™ 250 & 600Dry Free-Flowing Sand

When spreading sand, an additional vibrator is required.

SnowEx® DPS 250 Drop Pro™ 250 & 600Calcium Chloride Pellets

SnowEx® DPS 250 Drop Pro™ 250 & 600Calcium Flakes

 

product literature
Name Link
Brochure Download
Videos

Documents

  • 173665_SNOWEX_SpreadersCatalog_FNL_LR.pdf

    173665_SNOWEX_SpreadersCatalog_FNL_LR.pdf

  • 173665_SNOWEX_SpreadersCatalog_FNL_LR.pdf

    173665_SNOWEX_SpreadersCatalog_FNL_LR.pdf

Sales People
Contact Information

 Contact Information

Macdonald Equipment Sales

7 Robinson Rd.
Dunnville   Ontario , N1A 2W1

(905) 774-3676

Location
Model
DPS-250
Category Name
Snow Equipment
Year
2024
Sale Type
New
Manufacturer
SnowEx
Quantity
0
Manufacturer Qty
0
Motors
Direct Drive, 12V, Sealed
Capacity:
2.5 & 6.0 cu ft

 Request More Info