location_pin Get Directions
7 Robinson Rd., Dunnville, Ontario, Canada N1A 2W1
Phone (905) 774-3676 Fax (905) 774-6439
Banner

SnowEx

SnowEx® 10' POWER PUSHER™ (TRACE™)

  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
  • SnowEx® 10' POWER PUSHER™ (TRACE™)
 Value a Trade  Get Financed
Overview
Overview

NO SNOW LEFT BEHIND

When you commit to clearing a lot, you mean it. No snow left behind. But not all plows are created equal. With TRACE™ edge technology, the POWER PUSHER™ plows move massive amounts of snow—scraping down to the pavement—so you can save the time and money of dropping salt.
Specifications
Model
10' POWER PUSHER™
Category Name
Snow Equipment
Year
2024
Sale Type
New
Manufacturer
SnowEx
Quantity
0
Manufacturer Qty
0
Fits
Skid-Steer
Moldboard
Powder-Coated Steel
Blade Type
Pusher
Mount Type
Skid-Steer Attach Plate
Blade Width
10'
Blade Height
30"
Blade Width:
8', 10', 12', 14' & 16'
Moldboard Radius
27"
Side Plate Width
36"
Side Plate Height
30"
Approx. Snow Capacity
94 cu ft
Cutting Edge Material
High-Carbon Steel With Carbide Inserts
Cutting Edge Technology
TRACE — Terrain Response Advanced Cutting Edge
Horsepower Compatibility
60+ hp (Skid-Steer)
Approx. Weight* (Without Mount)
2,249 lb
unique features

SnowEx® 10' POWER PUSHER™ (TRACE™)

TRACE™ Edge Technology

The terrain-response advanced cutting edge is comprised of independent, 2′ sections that raise, oscillate, and trip to accommodate contours and obstacles in the plowable surface. Working together, the sections remove more snow, reducing the amount of salt required. Two greasing locations allow the operator to keep the components well lubricated for maximum performance.

SnowEx® 10' POWER PUSHER™ (TRACE™)

Easy Operation

Operation of the POWER PUSHER PRO pusher plow is conveniently tied into the equipment’s controls. Simply raise and lower the lift arm and angle the attachment plate to position the pusher in the correct orientation.

SnowEx® 10' POWER PUSHER™ (TRACE™)Common Attachment Plate

A common attachment plate with a floating coupler makes installation easy with a wide variety of equipment and machinery, including skid-steers, wheel loaders, backhoes, and tractors. The floating coupler reduces negative down pressure from the vehicle, protecting against premature wear of the pusher cutting edge and components.

SnowEx® 10' POWER PUSHER™ (TRACE™)Self-Leveling Side Plates With Reversible, Bolt-On Shoes

The side plates ensure the TRACE edge remains in direct contact with the plowable surface. The reversible, bolt-on shoe makes serviceability easy, allowing you to use both edges of the shoe before replacing. The bolt-on design makes replacement in the field possible with a ¾” socket, ratchet, and 3/4″ wrench.

SnowEx® 10' POWER PUSHER™ (TRACE™)3/4" Cutting Edge With Carbide Inserts

Each TRACE edge section comes standard with a 3 /4″ cutting edge with carbide inserts and uses the same part number for easy replacement. The 2’ edge sections are common across all POWER PUSHER models, reducing complexity and increasing fleet interchangeability. And there’s no need to replace the full cutting edge—only the sections that show wear—saving you time and money.

SnowEx® 10' POWER PUSHER™ (TRACE™)Modular Design (14’ & 16’ Widths)

When you purchase a 14’ or 16’ width pusher, you gain the advantage of two plow widths in one pusher. Remove the bolt on 2’ extensions on each end of the pusher to transition a 16’ into a 12’ option or a 14’ into a 10’ option. This increases flexibility for multiple property types that may benefit from a smaller pusher that is easier to maneuver.
product literature
Name Link
Snowplows Brochure Download
Videos Sales People
Contact Information

 Contact Information

Macdonald Equipment Sales

7 Robinson Rd.
Dunnville   Ontario , N1A 2W1

(905) 774-3676

Location
Model
10' POWER PUSHER™
Category Name
Snow Equipment
Year
2024
Sale Type
New
Manufacturer
SnowEx
Quantity
0
Manufacturer Qty
0
Fits
Skid-Steer
Moldboard
Powder-Coated Steel

 Request More Info

Policy |  Privacy  |  Site Map |  Dealer Login
Copyright© 2022 Macdonald Equipment Sales